The Samsung Galaxy Note 4 is still the latest phablet-sized smartphone under the Sammy name,. It’s recently seen the latest Android 5.0 Lollipop software update, but many people are choosing to leave that for now and stay with the trusty KitKat version. If you are rocking the Exynos system chip, Octa-Core CPU variant of the same and running the Android 4.4.4 KitKat software, you can unlock the internal system free from any restrictions by applying the steps below.

BEFORE WE BEGIN

  • Turn on the smartphone and navigate to the Settings, followed by the About Device menu and check that you have the N910H model number and no other. The key here is with the last letter. they all start with N910 and change the last digit depending on the carrier it’s hooked up with.
  • While you are still in the About Device menu, you want to check the software version matches up with Android 4.4.4 Kitkat and not something like 4.4.3 or 4.4.2 KitKat. Likewise, you want to avoid it saying Android 5.0 Lollipop.
  • Applying the following steps on your device does automatically void the manufacturers warranty on your device. You can gain that back again by unrooting the same device afterwards, thanks to special third-party applications available from the Google Play store.

HOW TO ROOT THE SAMSUNG GALAXY NOTE 4 SM-N910H RUNNING ANDROID 4.4.4 KITKAT

  1. Download the Samsung USB drivers for mobile phones from our page here.
  2. Use the desktop of the Windows PC for installing the drivers.
  3. Turn off the computer and back on again once you are done.
  4. Now you should have the drivers working.
  5. Download the Odin file here.
  6. Download the CF-Auto-Root file from here.
  7. Extract both of the files directly above to the desktop and run the Odin tool so it’s working. We’ll come back to it in a minute.
  8. Reboot the device in Download Mode.
    – you must start with it turned completely off, then press and hold the Volume Down + Power + Home buttons at the same time. Press the Power button once more if you get to the warning screen.
  9. Connect the Note to the computer with the same USB cable you use for charging the device.
  10. Open the Odin application on the computer and check the ID: COM port has changed to a color and it displays the word “added”.
  11. If that didn’t happen, you might need to retry installing the USB drivers.
  12. Do not adjust any of the default Settings in Odin.
  13. Leave the re-partition box empty.
  14. Click the AP button and upload the executable tar.md5 file from inside the extracted CF-Root folder on the desktop.
  15. Click the start button and wait for ten to fifteen minutes until the flashing completes.
  16. You’ll get a pass message on the display and the phone will reboot by itself.

Take control of your Google account and smartphone again after it reboots and you are rolling with root access on your Note 4. You can head over to the Google Play Store and install BusyBox.




Enter your email address:

Delivered by FeedBurner

Share this article if you like: