The Samsung Galaxy Note 4 is a large smartphone that comes with Android 4.4 KitKat out of the box. If you are still using the same on the last stage of 4.4.4 KitKat you can follow the guide below which will open up the internal system with root access, thus allowing you to install custom ROMs and check the look and features of your device away from the stock version of Android. There’s loads of other great reasons to gain root on your Note such as removing the default Samsung bloatware which it pre-install on the devices before sending them off to shop with carrier network stamps.
If you want to learn how to remove that bloatware, install new ROMs and root-requiring applications, you can do that by following the guide after the jump.
BEFORE YOU BEGIN
- Check what software version your phone is running by looking at the About Device menu from the Settings menu.
- You should see that it says Android 4.4.4 and no less a number. Likewise, it shouldn’t read Android 5.0 Lollipop or else you can’t use this file.
- Check that the model number of the device matches up with N910T, as there are several different model numbers and each requires a unique file type. You can find that information from the About Device menu also.You can only follow the guide using a Windows-based computer. Do not try installing this guide using an Apple Mac or Linux machine.
HOW TO ROOT THE SAMSUNG GALAXY NOTE 4 SM-N910T RUNNING IN ANDROID 4.4.4 KITKAT
- Download the Samsung USB Drivers for mobile phones from this page.
- Install the USB drivers on your Windows computer.
- Restart the computer so the drivers will start working.
- Download the CF-Auto-root package from this link.
- Download Odin 1.85 from here.
- Download both files to the desktop of your Windows computer and extract the files.
- Click to open the Odin executable file and have the program open and waiting on the desktop.
- Boot the smartphone in Download Mode.
– press Volume Down + Home + Power and press Power once again if you see the warning sign on the display.
- Connect the Note 4 to the computer with the USB cable.
- The ID: COM port in Odin will change color and it will say “added” on the computer monitor.
- Click the AP button and upload the tar.md5 file from the extracted CF package you downloaded earlier to the desktop.
- Leave the other settings as they are in Odin.
- Double check there is no check-mark in the re-partition box.
- Click the start button and the flashing will begin.
- You’ll get a pass or fail message within ten to fifteen minutes after clicking the start button.
- Fails mean you will have to try again. Most fails occur because the drivers not up to date.