Android operating systems are based on the Linux kernel — my personal favorite kernel and operating system out of any that are in existence in the whole world. However, just because they are my favorite doesn’t mean they are perfect. No operating system comes close — yet — to perfection. One of the problems that Android operating systems have on mobile devices is the fact that you can only control one audio device connected to the handset running Android at any given time. While that is undoubtedly a royal pain, there is a way around it. The way we get around the problem is by installing the Viper4Android application — an app that is only available for those of you with a rooted operating system. The Viper4Android app allows Samsung Galaxy Note 3 owners to control the music playback through the speakers, Bluetooth, and headset for any audio that you connect to the Galaxy Note smartphone.

The rooting exploit in this guide is based on LRX21V.N9008SZCUCOH2, which is part of an Android 5.0 Lollipop software update roll out to some regions. You do not need to have the same firmware build number running on your Note 3 smartphone before you follow this guide. The build ID is just given there for you to use as an indicator only. Chainfire says that some Samsung devices will not boot old images so you might need to take a look at the build number and install a build of a similar date to get your device rooted.

Samsung Galaxy Note 3

Files You Need

  • Download the CF-Auto-Root tool for the Note 3 SM-N9008S on Android 5.0 Lollipop from here.
  • Download the Samsung USB Drivers for the Galaxy Note 3 smartphone from here.

You must have the Samsung Galaxy Note 3 with the SM-N9008S model number to use this guide or else the rooting package will brick the device. You can find out the Note 3’s model number by tapping on the Settings icon > About Device > Model Number.

You must have a computer that is running a Windows operating system to use this guide or else the flashing tool will not work.

There will likely be some Android updates to the software that bring new bootloaders. These updates usually happen when Android is updated to a new version number. When that happens, Chainfire relies on the users like yourselves to submit the new recovery image files to the official CF-Auto-Root thread created by Chainfire over at the XDA-Developers website.

Android Lollipop

Rooting the Samsung Galaxy Note 3 SM-N9008S running the Android 5.0 Lollipop

  1. Turn on the USB Debugging Mode on the Samsung Galaxy Note 3 smartphone before you follow the rest of the guide.
  2. Extract the CF-Auto-Root tool to the desktop of the computer.
  3. Install the Samsung USB Drivers on the computer so your smartphone from Samsung can connect to the computer and be detected by the flashing tool.
  4. Double-click the Odin executable file that is on the desktop of the computer.
  5. Press the Power button on the Note 3 smartphone and choose to turn it off from the menu.
  6. Reboot the Samsung Galaxy Note 3 smartphone by pressing the hardware button combination for the download mode and then connect it to the computer with the USB cable that you usually use to charge the device which is the same USB cable that you found your device came with out of the box.
  7. Wait for at least five to ten seconds for the drivers to start working and then look for a yellow or blue ID: COM port coming from the Odin user interface letting you know that your device has been detected by the flashing tool and is now ready to flash.
  8. Do not change any of the default settings that are available from the Odin user interface. (Those are the default settings that you would usually see after extracting and opening a new Odin flashing tool version. Anyone who is using an existing Odin flashing tool version and has played with the default settings beforehand should download the rooting package and use the Odin flashing tool package that comes bundled with the rooting file, so you have a fresh copy.)
  9. Click the AP button from the Odin user interface and then browse the desktop for the rooting file that is ending in the tar.md5 extension and only available to you after you did the extraction at the beginning of the guide.
  10. Click the Start button from the Odin user interface and then look over at the display for the Samsung Galaxy Note 3 smartphone.
  11. Check that you can see your Galaxy Note 3 stating that it is installing the SuperSU application, cleaning the cache partition and the reflashing the stock recovery.
  12. Look up at the display of the computer and check the Odin user interface gives you a pass message in a green box.

In conclusion, that is all you need to root the Samsung Galaxy Note 3 SM-N9008S running on the Android 5.0 Lollipop software updates by using the updated version of the CF-Auto-Root tool by Chainfire and a computer that is running a version of the Windows operating system. Your Note 3 device will now reboot back into the normal mode where you will find the SuperSU application is now available from your application drawer. That SuperSU application will automatically be running each time you install a root requiring an application from the Google Play Store. All you need to do is be on the look out for messages asking you to grant the rooting permissions to the apps you want to have them. Additionally, you can open the Google Play Store and download the basic root checker app free and test if your device is properly rooted.

Furthermore, you can install one of the other versions of the Odin flashing application if you need to try a new version to get the guide to work. There will be times when one version of Odin — like the version that comes bundled with your rooting package — does not work for your Samsung Galaxy Note 3. These times appear to be completely random and unpredictable. All you need to do is extract a different Odin version much the same way as you extracted the rooting package that revealed the Odin you used in the guide above and then flash your rooting file in the new version of the Odin flashing application. The version of Odin that comes bundled with the Galaxy Note 3 rooting package is the Odin 3.10, but you can try the Odin 3.09 or even the Odin 3.07 instead.

Moreover, sometimes a device might not get into the recovery mode that is necessary for a device to be rooted. Chainfire says that any device that does not get into recovery mode after the flashing completes will not be rooted, and you will need to boot the device into the recovery mode manually. You can do that by pressing the hardware button combination for the recovery mode once the flashing is complete.